WearCast™ 2000
Wear-Con Densit® WearCast™ 2000 Chemically Bonded Corundum-Ceramic wear resistant lining is a castable, trowellable one-component ready-mix wear compound, able to conform to almost any shape and size specification. Frequently used to line pipes, bends, and other system components, WearCast™ 2000 is fast and easy to install and can be used after just 24 hours.
Frequently viewed resources
For industrial/occupational use only. Not for consumer sale or use.
Details
Installation
Wear-Con Densit® WearCast™ 2000 can be installed in five simple steps:
- Install mesh. Install or build mold. WearCast™ 2000 should be cast in suitable molds with adequate reinforcement such as steel bars and/or expanded metal mesh.
- Mix dry WearCast™ 2000 compound for 1 minute with a paddle mixer. Product must be kept completely dry until used.
- Add water and fibers, then mix for 8 minutes with a paddle mixer. A significant change in consistency of the material (from a dry powder to wet mortar) must be observed within 3 minutes from addition of water.
- Pour mixed WearCast™ 2000 into mold under vibration. Avoid making contact with aluminum or galvanized steel when using WearCast™ 2000.
- Remove mold from WearCast™ 2000 after adequate curing time.
Technical Specifications
Wear-Con Densit® WearCast™ 2000 is a high-strength wear compound combined with corundum aggregates to provide excellent protection against severe wear at temperatures up to 750°F.
Sizes
Wear-Con Densit® WearCast™ 2000 is delivered in 55 lb bags.
