WC910™
With up to 50 times the life of mild steel and tougher than ceramics, Wear-Con WC910™ Tungsten Tiles Brazed or Vacuum Bonded provide a more economical way of extending the life of parts and castings than solid tungsten carbide construction, and can be isolated to specific areas to combat extreme wear.
Frequently viewed resources
For industrial/occupational use only. Not for consumer sale or use.
Details
Installation
Wear-Con WC910™ can be applied by induction brazing with strict quality control, insuring permanent placement and consistency.
Technical Specifications
Wear-Con WC910™ provides an impact grade hardness of 68 HRc and a non-impact grade hardness of 93 HRa; shear strength from 20,000 to 50,000 psi; and a maximum service temperature of 800°F. Special carbide grades can be applied where higher impact, sliding, or corrosion resistance is required.
Properties
Details
Dimensions
1/4″x 3/8″ / 1/2″x 3/4″ / 1″x 1 1/2″
Thickness
1/16″ / 1/8″ / 3/16″
* Wear-Con WC910™ is available in an array of sizes and thicknesses to fit your wear needs.
