SHC800™ Panels
Wear-Con SHC800™ Wear Panels are cast from a proprietary blended alloy with a hardness of 55 to 58 HRc.
SHC800™ Wear Panels are unsurpassed in abrasion, erosion, and corrosion resistance; and are easy to install and replace
Frequently viewed resources
For industrial/occupational use only. Not for consumer sale or use.
Details
Installation
Wear-Con SHC800™ Wear Panels can easily be bolted or welded into place. The most common method of installation is bolting with Wear-Con Plow Bolts through the counter-sunk holes. SHC800™ Wear Panels can also be plug welded with special designed Plug Inserts and 309 – 310 stainless steel wire/rod.
Technical Specifications
Wear-Con SHC800™ Wear Panels provide maximum abrasion resistance along with the ability to withstand temperatures up to 900°F. SHC800™ Wear Panels will outlast alloy plate and perform to abrasion standards similar to ceramics.
Properties
Dimensions
Thickness
1/2”
6” x 6″
6” x 18″
12” x 12″
12” x 14″
12” x 18″
Part Number
5053.4.1
5053.2.1
5053.3.1
5053.5.1
5053.1.1
3/4”
6” x 6″
6” x 18″
12” x 12″
12” x 14″
12” x 18″
Part Number
5053.4.2
5053.2.2
5053.3.2
5053.5.2
5053.1.2
1”
6” x 6″
6” x 18″
12” x 12″
12” x 14″
12” x 18″
Part Number
5053.4.3
5053.2.3
5053.3.3
5053.5.3
5053.1.3
* Wear-Con SHC800™ Wear Panels are available in an array of sizes and thicknesses to fit your wear needs.
