Your Blue Line of Defense

Proprietary Blended Alloy Wear Panels

Wear-Con SHC800 Wear Panelsare cast from a proprietary blended alloy with a hardness of 55 to 58 HRc.

SHC800 Wear Panelsare unsurpassed in abrasion, erosion, and corrosion resistance; and are easy to install and replace.

Installation

Wear-Con SHC800 Wear Panels can easily be bolted or welded into place. The most common method of installation is bolting with Wear-Con Plow Bolts through the counter-sunk holes. SHC800 Wear Panels can also be plug welded with special designed Plug Inserts and 309 - 310 stainless steel wire/rod.

Technical Specifications

Wear-Con SHC800 Wear Panels provide maximum abrasion resistance along with the ability to withstand temperatures up to 900°F. SHC800 Wear Panels will outlast alloy plate and perform to abrasion standards similar to ceramics

Sizes

Wear-Con SHC800 Wear Panels are available in an array of sizes and thicknesses to fit your wear needs.

Standard Sizes

Dimensions Thickness
1/2” 6” x 6" 6” x 18" 12” x 12 12” x 14" 12” x 18"
Part Number 5053.4.1 5053.2.1 5053.3.1 5053.5.1 5053.1.1
3/4” 6” x 6" 6” x 18" 12” x 12" 12” x 14" 12” x 18"
Part Number 5053.4.2 5053.2.2 5053.3.2 5053.5.2 5053.1.2
1” 6” x 6" 6” x 18" 12” x 12" 12” x 14" 12” x 18"
Part Number 5053.4.3 5053.2.3 5053.3.3 5053.5.3 5053.1.3

Contact Details