Curing Compound
Wear-Con Densit® Curing Compound is a surface sealer that is applied to all Densit® wear protection products after installation to retain water in the wear-resistant lining throughout the curing period. It reduces plastic shrinkage and thus also the risk of poor bonding and minimize crack formation.
Frequently viewed resources
For industrial/occupational use only. Not for consumer sale or use.
Details
Installation
Wear-Con Densit® Curing Compound is a “ready to use” water-based white liquid and is applied using a sprayer with an atomizing spray nozzle. The Densit® Curing Compound must be applied as a uniform coating after surface preparation has been achieved. It will dry in approximately 4 hours dependent on temperature and moisture of the atmosphere.
Technical Specifications
Wear-Con Densit® Curing Compound’s active component is paraffin wax, appearing as a white liquid and it has no odor. Density g/m3 (lb/in3) 0.97 (0.035). Storage temperature °C (°F) 5-25 (41-77). Maximum storage time is 12 months. Efficiency (ASTM c 156) % Approximately 90.
Sizes
Wear-Con Densit® Curing Compound is delivered in 30, 190 and 900 kg.
