Features & Benefits
Wear-Con Cerami-Bond™HT Premium Epoxy Mortar Tile Adhesive is an industrial grade 100% solids two-part, high temperature, epoxy paste for use in bonding ceramic tiles. Cerami-Bond™ is especially suited for use in high temperature wear tile applications requiring high bond strength, physical properties, and good chemical resistance at operating tempteratures of 350°F. Wear-Con Cerami-Bond™ HT is resistant to caustic solutions, most diluted acids, hypochlorite bleaches, and other harsh chemicals. CeramiBond™ HT cures at room temperature to a tough solid. Cerami-Bond™ HT adheres to almost any clean surface.
Wear-Con Cerami-Bond™ HT is easy to mix and install. Simply mix one part Resin - Part A with one part Hardener - Part B and trowel on both surfaces. Cerami-Bond™ HT offers excellent troweling and handling characteristics, with sufficient body and thixotropy to butter brick in place and secure them from slipping or sliding while the mortar cures. Cerami-Bond™ HT cures rapidly and provides an excellent bond to brick, tile, and steel. This unique formulation produces excellent results while installing brick in horizontal, vertical, and even overhead areas. Cerami-Bond™ HT is workable for up to 45 minutes at 70°F.
Wear-Con Cerami-Bond™ HT adheres to contaminant free clean surfaces in working temperatures from 60°F to 110°F continuously. Cured Cerami-Bond™ HT has a compressive strength of 11,220 psi, a tensile strength of 3600 - 4100 psi and a maximum operating temperature of 350°F (excursions to 400°F). One two-gallon unit of Cerami-Bond™ HT covers approximately 14² ft of tile lining when used as a setting bed for tile with a nominal 1/16” joint thickness between the tile.
Wear-Con Cerami-Bond™ HT is available in 2 gal. kit quantities, (1 gal. resin and 1 gal.) hardener).